How To Take A Pregnancy Test?

Pregnancy Test Instructions Instructions for using your pregnancy tests If you miss a period, please take a pregnancy test. We have given you two pregnancy tests for this purpose. If you need additional pregnancy tests, please contact us by phone or email. When you have a POSITIVE PREGNANCY TEST, please CONTACT US TO SCHEDULE YOUR ULTRASOUND. You can call us at 919-843-8246, or email us at, Instructions:

Remove the plastic cap to expose the absorbent window. Point the absorbent tip (with 5 small openings) directly into the urine stream. Take the sample for at least 7-10 seconds, to ensure that an adequate sample is collected by the testing device. (Another technique is to collect the urine into a clean container and dip half of the absorbent pad for at least 10 seconds.) Re-cap the device and place it horizontally on a clean, flat surface. Wait 5 minutes for the test to finish processing.

RESULT INTERPRETATION Negative Result: NOT PREGNANT Only one color band appears on the top Control (C) region. There should be no apparent band on the Test (T) region. The control line is designed to validate the test and should be crisp and clear in intensity against the white background. Positive Result: POSSIBLE PREGNANCY Distinct and consistent color bands appear on the Control (C) and Test (T) regions. Color intensity of the bands may vary according to concentration and level of hCG development. The test line is usually slightly weaker in intensity in comparison to the control line.

The pattern of increasing intensity of the test line is a much better predictor of pregnancy rather than any individual reading. Invalid Results If there is no visible control line, discard the test. Repeat test with a new device. STORAGE Store pregnancy tests at normal room temperature, between 36°F and 86°F.

Discard unused pregnancy tests after the expiration date, which is stamped on each sealed pregnancy test. Avoid prolonged exposure to direct sunlight, moisture, heat, and other related conditions. DISPOSAL Urine samples and used test devices are potentially infectious, so please keep them away from direct contact with objects.
View complete answer

Is a little bit of pee enough for a pregnancy test?

Can I get a false negative on a pregnancy test if I didn’t pee enough? By | Feb.14, 2013, 12:32 p.m. Category: Can a pregnancy test come up negative if I didn’t pee enough? A false negative on a home pregnancy test is possible, but extremely unlikely.

As long as your urine got on the test’s absorbent strip, it should be accurate. You can always take another test if you’re worried you might have missed. Something that can give you a false negative is taking the test too early. Pregnancy tests are most accurate if you take them after your period is already late.

Tags:,, : Can I get a false negative on a pregnancy test if I didn’t pee enough?
View complete answer

Can too much pee on a pregnancy test make it positive?

Yes! Drinking too much water — or any liquid — can affect a pregnancy test. The hormone hCG is more concentrated in your urine first thing in the morning. If you haven’t missed your period yet, your hCG level may not be high enough to be detected in more diluted urine.
View complete answer

Is the first pee of the day best for pregnancy test?

When to take a blood pregnancy test – Maybe you’ve taken a home pregnancy test, but now your health care provider is suggesting you take a blood test. What exactly is and when should you take a blood pregnancy test? Home pregnancy tests measure the levels of hCG in your urine.

A blood pregnancy test measures the hCG levels in your blood. Health care providers suggest taking a blood test because they’re more sensitive and can offer more information than a home urine test. The best time to take a blood pregnancy test is if your period is several days late, If your home pregnancy tests are negative, but you’re experiencing all the symptoms of pregnancy, it’s a good idea to take a blood test.

The most accurate blood tests are quantitative blood pregnancy tests, because they determine the exact amount of hCG in your blood. This is important because it can tell your health care provider if you’re pregnant or if you need to do another test in a few days.

Health care providers also recommend blood tests if you’ve experienced an ectopic pregnancy or a miscarriage in the past. This ensures your health care provider will be able to observe your hCG levels more closely in the first weeks of your pregnancy. You might wonder when to take a pregnancy test to get accurate results.

Whether you’re hoping for a positive or a negative, taking a test the week after your missed period is probably the best way to find out. If you’re in a hurry, you can try taking a test at least one to two weeks after sex, but the results may not be as accurate.
View complete answer

Can I test pregnancy at night?

– In short, yes. You can take a pregnancy test at night. However, the question of whether you should in order to get an accurate result is a little less clear. Home pregnancy tests that rely on your urine are designed to respond to certain levels of human chorionic gonadotropin (hCG),

The placenta produces this hormone, and during the first 8 to 10 weeks of your pregnancy, hCG levels rise rapidly. By the tenth day from ovulation (approximately the first day of your missed period), there should typically be enough hCG in your urine for an at-home pregnancy test to detect it. Some of the more expensive home pregnancy tests advertise that they can detect hCG levels earlier, because who doesn’t want their results sooner? However, there’s research to indicate that claims about how early some tests can detect a pregnancy aren’t always accurate.

One of the benefits of choosing to take a pregnancy test in the morning instead of at night is that your urine is likely to be more concentrated. You probably haven’t been drinking or peeing as much overnight since you’ve been sleeping. In the early days of your pregnancy, when hCG levels are still increasing, your first morning urine will offer you the greatest chance of having sufficient hCG levels built up for a positive pregnancy test.
View complete answer

How many hours should you hold your pee before pregnancy test?

What time should I take a pregnancy test? – In general, the best time is when you have your first morning pee. However, some pregnancy tests are sensitive enough to detect HCG no matter what time of day you take the test. When possible, try to wait until it’s been three hours since your last pee before you take the test. You could also take two pregnancy tests to confirm you get the same result.
View complete answer

Can too much urine cause a false negative pregnancy test?

Updated on October 3, 2022 When it’s time to take a pregnancy test, your emotions may be running high. Some women strongly suspect that they’re pregnant but then get a negative test result. If you’re sure you’re pregnant, but your test was negative, then read on.

• We’ve outlined the different ways your test could have gotten messed up.
• Before the 1970s, there was no way women could tell if they were pregnant without the help of a doctor.
• At-home pregnancy tests weren’t invented until 1976.
• The technology used in these tests has improved significantly since then.

When used correctly, they are almost 99 percent accurate. If you’re attempting to use an at-home pregnancy test, read the directions carefully and follow them closely. Any skipped steps or timing issues can give you the wrong results. Take a quiz Find out what you can do with our Health Assistant The test strip is designed to track the levels of human chorionic gonadotropin (hCG) in your urine.

1. HCG is a hormone that’s created in your body once a fertilized egg implants in the uterus (or outside the uterus in case of an ectopic pregnancy).
2. Your body only produces this hormone if you’re pregnant (the production of the hormone by some cancerous tumors is the only exception).
3. HCG doubles roughly every 48 hours, but this isn’t the case for everyone — you can use our online hCG calculator to track your hCG levels at home.

To get the most accurate results, follow these steps:

Take the pregnancy test on the first day of your missed period, If you’re pregnant, your placenta will have started to produce hCG by this point, and the hormone will be present in your urine. Take the test first thing in the morning, Your hCG levels will be at their highest in the morning, so you have a greater chance of them being detected by the test.Don’t drink too much. Don’t drink to make yourself pee in the morning. Extra fluids can dilute your hGC levels and cause your test to fail.

Each test has different “positive” and “negative” indicators, so read your package carefully to make sure you know what the various results mean. Some common results for “pregnant” are:

A smiley faceA pink lineA blue lineThe word “pregnant”

Some women get a negative result only to find out later from their doctor that they are, in fact, pregnant. There are a few reasons why the test may not read your hCG correctly. If you got a negative reading from a pregnancy test but later learned that you were pregnant, how did the test get it wrong? What causes false-negative pregnancy tests? There are a few ways that the test could read your urine wrong.

• If you don’t follow the directions on the package, the pregnancy test will not be set up properly to test your urine.
• Each test is different and comes with different directions.
• You may have missed a step or performed the test incorrectly.
• If you’re getting a false-negative pregnancy result consistently and you’re sure that you’re pregnant, go to the doctor.

They use a similar pregnancy test, but they’re used to the variables and can have more accurate results. Your hCG won’t be high enough to detect until six days after conception, If you took the test too early, then the test will read negative even if you are pregnant.

The test is fine-tuned to detect low amounts of hCG, but there aren’t enough hormones to be detected on the test until about a week after conception. It’s a good idea to wait until the first day of your missed period to take a pregnancy test. Once your hCG levels are high enough, your period should stop.

That means it’s been at least six days since conception, and the test should read positive if you’re pregnant. You have to be sure about the timing of the first day of your period. Many women have irregular periods, or don’t track them, and may get the day wrong.

When you track your periods, you can get to know your cycle. It has its own ebbs and flows, but you can learn the basics, like the typical length of your cycle. If you know your cycle, you can tell with more accuracy when you missed the first day. On average, a normal cycle is between 21 and 35 days. Some women take a pregnancy test just before their period is supposed to start, when hCG levels are too low to be detected.

Diluting your hCG levels can also give you a false-negative pregnancy result. If you’re preparing to take a pregnancy test, it’s best to take it first thing in the morning. Some women drink water or other fluids early in the morning or late at night in order to be able to pee in the morning for the test.

1. Diluting the urine can spread out the presence of hCG and make it too low for the test to read, giving you a false reading.
2. Conversely, if your hCG levels are too high, your pregnancy test can also return a false-negative.
3. This is called a “hook effect.” It’s very rare, but it does happen.
4. Pregnancy tests are designed to track a specific range of hCG in the body.

If you have too little, (if you took the test too early or diluted your urine), it won’t be detected. If you have too much, (if you took the test too late), the test strip may not be able to bond to any of the molecules, possibly showing a negative result,

Hormonal disorders (e.g., thyroid dysfunction, high prolactin, polycystic ovary syndrome) Too high or too low body weight Some chronic diseases Illness Travel Poor sleep High stress Excessive exercise

If these explanations don’t apply to you, visit the doctor to get a second pregnancy test. They use a blood test, which is more accurate and can detect lower levels of hCG than a home pregnancy test can. When it comes to pregnancy tests, follow the directions and know your cycle.

If you’ve followed the directions closely and know your cycle well, you should get accurate results. However, if you suspect you’re pregnant and are still getting false-negative pregnancy test results, then go to your doctor. They can determine for certain whether you’re pregnant or if you’ve missed your period for some other reason.

https://www.fda.gov/medical-devices/home-use-tests/pregnancy https://medlineplus.gov/ency/article/003619.htm https://www.mayoclinic.org/healthy-lifestyle/getting-pregnant/in-depth/home-pregnancy-tests/art-20047940
View complete answer

What happens if you pee on a pregnancy test twice?

– You may know from high school chemistry (or not — we don’t remember, either) that a chemical reaction between two agents happens once. Then, to accurately conduct that reaction again, you need to start fresh again with the same two agents. So when your urine touches an HPT pee stick — either by you holding the stick mid-stream or dipping the stick into your collected urine — the reaction takes place.

1. It can’t take place again.
2. Think of a kernel of corn popping — once it’s popped, you can’t pop it again.
3. You need a new kernel.) What if you open the test and it accidentally gets splashed with plain old water? Well, remember that water is still made up of chemical elements — hydrogen and oxygen — that can react with the test strip.

Presumably, water will give a negative result (we hope!), but you still can’t then add your urine to the strip as well. If you reuse a strip that has gotten wet — either with water or urine and even if it’s dried — you may get a false positive. That’s because as an HPT dries, an evaporation line can appear.
View complete answer

How soon after unprotected can I test for pregnancy?

How soon after unprotected sex can I test for pregnancy? – Rule of thumb: For the most accurate results, wait a minimum of two weeks after having unprotected sex to take a pregnancy test, said Dr. Whelan. That’s true for both at-home and blood tests. That’s because your body needs time to build up hCG, the hormone that’s produced during pregnancy.
View complete answer

How early did you get a positive pregnancy test?

Will you need a blood test to confirm your pregnancy? – Not necessarily. To make sure you’re pregnant, most healthcare providers use a urine pregnancy test, just like your at-home pregnancy test, But your provider may use a blood test instead. Just note: It may take anywhere from an hour to a day or more to get the results. There are two types of pregnancy blood tests:

A qualitative hCG blood test just shows whether there is hCG in your blood. The results return as “positive” or “negative.” You usually get the results in about the same time you would with a urine test. A quantitative blood test (beta hCG test or serum test) measures the exact amount of hCG in your blood. The results return as a number. This test is very accurate. It can detect hCG as early as six to eight days after ovulation, or about a week before your period is due. It takes longer to get results from a quantitative blood test, though.

Again, your provider may not give you a blood test. Oftentimes, a positive home pregnancy test is enough to get started with the prenatal care you need.
View complete answer

How early can pregnancy be detected in urine?

How early you are able to take a pregnancy test will depend on the type of test that you use. All pregnancy tests measure the amount of the pregnancy hormone, human chorionic gonadotrophin (hCG) in your body. This hormone is produced when the egg is fertilized and attaches to the uterine wall, usually six days after fertilization.

• Some tests are more sensitive than others and can detect very low levels of hCG in your body.
• The more sensitive tests could detect hCG as early as four days before your missed period.
• The sensitivity of a pregnancy test can be found on the packaging and is measured in mIU/ml (milli-International Unit per milliliter).

Sensitivity can range from 10mIU/ml to 40mIU/ml. The lower the number, the more sensitive the test is and, in turn, will detect pregnancy sooner. Different Types of Tests There are two main types of pregnancy tests, urine test and blood test. Both tests detect the amount of hCG in the body.

Urine Test Urine tests can be purchased at the grocery store or pharmacy and done in the privacy of your home. Results are most accurate when the test is performed when your period is due, or about 2 weeks after you ovulate. However, some can detect pregnancy as early as 4 days before your missed period.

If you get a positive result, you will want to make an appointment with your doctor to have a blood test done to confirm the pregnancy and begin prenatal care. If you get a negative result, you either may not be pregnant, or may have ovulated later than you expected and levels of hCG may be too low to be detected.

If you still do not get your period, test again in a few days. The levels of hCG will continue to increase rapidly, practically doubling every two to three days, and may be high enough to then be detected by the test. Blood Test Blood tests are done at a doctor’s office or lab and are also effective in detecting hCG in the body.

Blood tests are more sensitive than urine tests and can detect pregnancy as early as 6-8 days after ovulation. Unfortunately, most doctors will not perform the blood test until after the date that your period is due has past. The results of blood tests also take longer than a urine test.
View complete answer